Real Time GPS Tracker for Vehicles VT02G

Product Description

Real Time GPS Tracker for Vehicles VT02G

The VT02G is a real time GPS tracker for variety of vehicle tracking applications. With multiple digital and analog I/Os interfaces, VT02G real time GPS tracker can be used for monitoring or controlling external devices. With superior sensitivity and fast time to first fix GPS receiver, VT02G real time GPS tracker’s location can be monitored in real time or periodically tracked by a backend server and mobile devices. With the built-in 3-axis accelerometer, the device has motion detection and extends battery life though special power management algorithms. The complicated protocols support a wide variety of reports such as geo-fence boundary crossings, emergency, driving behavior, low battery and scheduled GPS position.

Features:
– Wide operating voltage range 8V to 32V DC
– Internal GPS/GLONASS chipset
– Low power consumption, long standby time with internal battery
– Quad band GSM/GPRS 850/900/1800/1900 MHz
– Embedded full featured @Track protocol
– Multiple I/O interfaces for monitoring and control
– Internal 3-axis accelerometer for power conservation and motion detection
– Three analog inputs for external sensor
– Internal and optional external GSM antenna
– Internal and optional external GPS antenna
– CE/PCT RU/FAC (Russia) certified

GSM Specifications
– Frequency:
Quad band: 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
– GPRS: GPRS multi-slot class 12
GPRS mobile station class B
– RMS Phase Error: 5 deg
– Max Out RF Power:
GSM850/GSM900: 33.0±2 dBm
DCS/PCS: 30.0±2 dBm
– Dynamic Input Range: -15 ~ -108 dBm
– Receiver Sensitivity: Class 2 RBER 2% (-107dBm)
– Stability Of Frequency: < 2.5 ppm
– Max Frequency Error: ±0.1 ppm

GPS Specifications
– GPS Chipset: GPS/GLONASS receiver
– Sensitivity:
Autonomous: -144 dBm
Tracking: -161 dBm
– Position Accuracy: 2m CEP
– TTFF (Open Sky):
Cold start: 35s average
Warm start: < 35s
Hot start: < 1s

Interfaces
– Digital Inputs: Four digital inputs. Two positive trigger inputs and two negative trigger inputs
– Analog Inputs: Three analog inputs (0 to 2.8V)
– Digital Outputs: Four digital outputs. Negative trigger, 200 mA max current drain
– Two-Way Audio: Speaker and microphone on 24 pin molex type connector
– GSM/GPS Antenna: FAKRA type connector for external antennas
– Indicator LED: GSM, GPS and power
– Serial Port: Two RS232 serial ports on 24 pin molex type connector. One for configuration, the other for external devices (GARMIN protocol support)

General Specifications
– Dimensions: 105mm*78mm*24mm
– Weight: 140g
– Backup Battery: Li-ion 1000 mAh
– Standby Time:
Without reporting: 220 hours
5 minute reporting: 80 hours
10 minute reporting: 95 hours
– Operating Voltage: 8V to 32V DC
– Operating Temperature:
-30°C ~ +80°C (without battery)
-40°C ~ +85°C for storage (without battery)
– Power Management: Full power path management. Backup battery is not used when external power is available

Air Interface Protocol
– Transmit Protocol: TCP, UDP, SMS
– Scheduled Timing Report: Report position at preset time and distance intervals
– Geo-fence: Geo-fence alarm and parking alarm, support up to 5 geo-fence regions
– Low Power Alarm: Alarm when backup battery is low
– Power On Report: Report when the device is powered on
– Tow Alarm: From internal 3-axis accelerometer
– Antenna Disconnect Alarm: Alarm when the GPS antenna is disconnected
– Special Alarm: Special alarm based on the digital/analog inputs
– Remote Control: OTA control of outputs