Real Time GPS Car Tracking Device VT02

Product Description

Real Time GPS Car Tracking Device VT02

The VT02 is a real time GPS car tracking device for variety of vehicle tracking applications. With multiple digital and analog I/Os interfaces, VT02 real time GPS car tracking device can be used for monitoring or controlling external devices. With superior sensitivity and fast time to first fix GPS receiver, VT02 real time GPS car tracking device’s location can be monitored in real time or periodically tracked by a backend server and mobile devices. With the built-in 3-axis accelerometer, the device has motion detection and extends battery life though special power management algorithms. The complicated protocols support a wide variety of reports such as geo-fence boundary crossings, emergency, driving behavior, low battery and scheduled GPS position.

Features:
– Wide operating voltage range 8V to 32V DC
– Internal u-blox chipset
– Low power consumption, long standby time with internal battery
– Quad band GSM/GPRS 850/900/1800/1900 MHz
– Embedded full featured @Track protocol
– Multiple I/O interfaces for monitoring and control
– Internal 3-axis accelerometer for power conservation and motion detection
– Three analog inputs for external sensor
– Internal and optional external GSM antenna
– Internal and optional external GPS antenna
– CE/E-Mark certified

GSM Specifications
– Frequency:
Quad band: 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
– GPRS:
GPRS multi-slot class 12
GPRS mobile station class B
– RMS Phase Error: 5 deg
– Max Out RF Power:
GSM850/GSM900: 33.0±2 dBm
DCS/PCS: 30.0±2 dBm
– Dynamic Input Range: -15 ~ -108 dBm
– Receiver Sensitivity: Class Ⅱ RBER 2% (-107 dBm)
– Stability Of Frequency: < 2.5 ppm
– Max Frequency Error: ±0.1 ppm

GPS Specifications
– GPS Chipset: u-blox All-In-One GPS receiver
– Sensitivity:
Autonomous: -148 dBm
Hot start: -160 dBm
Tracking: -162 dBm
– Position Accuracy:
Autonomous: < 2.5m
SBAS: 2m
– TTFF (Open Sky):
Cold start: 30s average
Warm start: < 30s
Hot start: < 1.2s

Interfaces
– Digital Inputs: Four digital inputs. Two positive trigger inputs and two negative trigger inputs
– Analog Inputs: Three analog inputs (0 to 2.8V)
– Digtal Outputs: Four digital outputs. Negative trigger, 200 mA max current drain
– Two-Way Audio: Speaker and microphone on 24 pin molex type connector
– GSM/GPS Antenna: FAKRA type connector for optional external antennas
– Indicator LED: GSM, GPS and power
– Serial Port: Two RS232 serial ports on 24 pin molex type connector. One for configuration, the other for external devices (GARMIN protocol support)

General Specifications
– Dimensions: 105mm*78mm*24mm
– Weight: 140g
– Backup Battery: Li-ion 1000 mAh
– Standby Time:
Without reporting: 220 hours
5 minute reporting: 100 hours
10 minute reporting: 150 hours
– Operating Voltage: 8V to 32V DC
– OperatingTemperature:
-30°C ~ +80°C (without battery)
-40°C ~ +85°C for storage (without battery)
– Power Management: Full power path management. Backup battery is not used when external power is available

Air Interface Protocol
– Transmit Protocol: TCP, UDP, SMS
– Scheduled Timing Report: Report position at preset time and distance intervals
– Geo-fence: Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
– Low Power Alarm: Alarm when backup battery is low
– Power On Report: Report when the device is powered on
– Tow Alarm: From internal 3-axis accelerometer
– Antenna Disconnect Alarm: Alarm when the GPS antenna is disconnected
– Special Alarm: Special alarm based on the digital/analog inputs
– Remote Control: OTA control of outputs